Switch Data

This dialog box includes the following areas and tabs:

See Common Tabs for information on the Location, Comments, Hyperlinks, Media Gallery, or Collected Data tabs.

Figure 1: Switch Data Dialog Box

Connection Information

Option Description
ID Name

Uniquely identifies the equipment item. The program automatically assigns a name, but you can change it, if needed. The name can be up to 16 characters long.

For switches, the program automatically assigns the names SW-1, SW-2, SW-3, and so on.

On Bus

This is the ID name of the bus to which the equipment is connected. The base kV of the bus is indicated on the right.

Connection Type

Whether the switch is connected as a Feeder (such as to a cable, busway, or transformer) or as a Tie (between two buses).

Open/Closed Normal state of the switch. If Open, the one-line displays "OPEN" next to the switch symbol. If Closed, the one-line symbol does not show the "OPEN" tag.
Group Name/Type If the switch is part of a functional group, the group name and type appears here. See Functional Groups.

Specifications Tab

Option Description
Mfr

Provides a list of manufacturers available in the device library. If the desired manufacturer is not listed in the device library, you can add it to the library.

If the desired manufacturer is missing from the list, select Other.

Type

Equipment types available from the selected manufacturer. If the desired type is not listed, you can add it to the library.

If the desired manufacturer is missing from the list, select Other.

Style Switch styles available from the manufacturer chosen in the Mfr field above in the type specified. After you choose a manufacturer and type, the styles available in the yellow column of the corresponding device library page are displayed here.

Standard

Displays the standard used for short circuit calculation based on the selected type of fuse.

Continuous Current Continuous current of the switch. This value is for reference only and does not affect analysis.

Assumed Opening Time

The estimated time it takes to open the circuit.

Short Circuit Tab

Figure 2: Short Circuit tab of Switch Data Dialog Box (ANSI)

Figure 3: Short Circuit tab of Switch Data Dialog Box (IEC)

Option Description
Momentary / C&L (kA) Momentary or close & latch rating of the switch. The values available from the device library are typically the close and latch values for spring and mechanically operated switches, since this is the lowest rating. Some switches, however, have only momentary ratings.

Peak Withstand (kA)

The peak withstand current is equal to the rated short circuit making current.

Calculate Fills in a computed value for based on the device library entry for Mfr, Type, Style, and the base kV. You can override this value by typing in a different number.

Harmonics Tab

Figure 4: Harmonics Tab

Option Description
Monitor IEEE 519 Point of Common Coupling

EasyPower can monitor whether or not the IEEE 519 guideline for harmonics is met at the point of common coupling.

If selected, then the Harmonics Report indicates when this guideline is not being met.

kVA Demand The kVA demand.
PCC Isc/Load The ratio of short circuit current to load current at the point of common coupling.

Other Tabs

See Common Tabs for information on the Location, Comments, Hyperlinks, Media Gallery, or Collected Data tabs.

More Information

Database Technical Reference Common Tabs
Media Gallery  
     

www.easypower.com

EasyPower, LLC

7730 SW Mohawk St.

Tualatin, OR 97062

(503)655-5059

techsupport@easypower.com

feedback@easypower.com

EasyPower knowledge base

EasyPower Version 10.0

Copyright © 2018 EasyPower, LLC. All Rights Reserved.

Help was last updated on 5/22/2018