Creating a New Drawing

To create a new drawing:

  1. Select the items in the one-line that you would like to include in your drawing.
  2. Open the EasyControl toolbox and then click New Drawing. A new drawing is added to the drawing list.
  3. Type a name for the drawing and press ENTER or click elsewhere on the one-line to save it.

Figure 1: Example of a Drawing View

You can set default drawing options so that when you create drawings, the defaults you have chosen are used. To set the default for drawings click Tools and then click Drawings.

Note: When you select items to include in a drawing, if you select a piece of equipment but not its connected bus, the bus will automatically be included in the drawing.

More Information

Making One-line Diagrams Editing a Drawing
Drawing Title Block Templates  
Drawings  
     

www.easypower.com

EasyPower LLC

7730 SW Mohawk St.

Tualatin, OR 97062

(503)655-5059

techsupport@easypower.com

feedback@easypower.com

EasyPower knowledge base

EasyPower Version 10.2

Copyright © 2019 EasyPower LLC. All Rights Reserved.

Help was last updated on 3/22/2019