You are here:

Temporary Two-Winding Transformer Data

Figure 1: Temporary Two-Winding Transformer Data Dialog Box

Options	Description
Winding Information	Tap kV: Tap kV of a winding. Unless you change them from this dialog box, these values default to the tap kV values set from the Database Edit focus.
LTC Information	These choices are only available if the transformer is defined to have LTC information from the Database Edit focus. Auto: Sets LTC to automatically control voltage or var flow. Blocked: Sets LTC to be blocked. The solution will be determined directly from transformer taps. Step Size: LTC step size default is the percentage in the database dialog box, but you can type in your own percentage step size.

Options

Description

Winding Information

Tap kV: Tap kV of a winding. Unless you change them from this dialog box, these values default to the tap kV values set from the Database Edit focus.

LTC Information

These choices are only available if the transformer is defined to have LTC information from the Database Edit focus.

Auto: Sets LTC to automatically control voltage or var flow.
Blocked: Sets LTC to be blocked. The solution will be determined directly from transformer taps.
Step Size: LTC step size default is the percentage in the database dialog box, but you can type in your own percentage step size.

Tip: Click DB Info to view all of the item's database information.

More Information

Temporary Dialog Boxes
Power Flow Analysis


	www.easypower.com EasyPower LLC 7730 SW Mohawk St. Tualatin, OR 97062 (503)655-5059	techsupport@easypower.com feedback@easypower.com EasyPower knowledge base EasyPower Version 10.2 Copyright © 2019 EasyPower LLC. All Rights Reserved. Help was last updated on 3/22/2019

EasyPower LLC

7730 SW Mohawk St.

Tualatin, OR 97062

(503)655-5059

EasyPower Version 10.2

Help was last updated on 3/22/2019