Equipment Groups

For both the Arc Flash Hazard and Equipment Duty Comparison Reports, you can select the equipment groups you want to see on the report. The equipment group determines the equipment you want to evaluate, and includes buses, panels, and MCCs.

The initial equipment group is All or Selected. The reports display all equipment (if none were selected on the one-line) or only the equipment that was selected prior to opening the report.

You can also create your own equipment groups. To create an equipment group:

  1. In the Scenario Comparison Report Options dialog box, next to Equipment group, click Manage Equipment to open the Manage Equipment Groups dialog box.
  2. Figure 1: Manage Equipment Groups Dialog Box

  3. Click Add.
  4. Figure 2: Manage Equipment Groups Dialog Box - Adding a New Group

  5. In Group name, type the name you want for the group.
  6. Under Available equipment, select the equipment you want to include in the group, and then click Add >. The equipment you select appears in the Selected equipment area.
  7. If you need to remove equipment you have added, click Remove.
  8. When you are finished, click Save Changes.

More Information

Scenario Comparison Reports Working with the Arc Flash Scenario Comparison Report
Scenario Comparison Report Options Working with the Equipment Duty Scenario Comparison Report
     

www.easypower.com

EasyPower LLC

7730 SW Mohawk St.

Tualatin, OR 97062

(503)655-5059

techsupport@easypower.com

feedback@easypower.com

EasyPower knowledge base

EasyPower Version 10.2

Copyright © 2019 EasyPower LLC. All Rights Reserved.

Help was last updated on 3/22/2019