You are here: Arc Flash Hazard Analysis > Determination of System Grounding

Determination of System Grounding

As per IEEE 1584 Std-2002., the type of grounding used in any LV system can affect the arc flash incident energy. EasyPower automatically determines which grounding type to use based on a short circuit algorithm.

For the equipment being evaluated, single line to ground fault is performed on A-Phase. The voltage per unit (Vpu) is computed on B and C phases of the equipment. The average of the two Vpu’s is compared with a threshold value that is specified in Tools > Options > System. This value is called Arc Flash Ground Vpu. This has a default value of 1.45, but you can modify it, if necessary.

If the calculated Vpu is less than the specified threshold, the system is considered to be effectively “solidly grounded.” Otherwise, it is considered “ungrounded or resistance grounded.”

More Information

Arc Flash Hazard Analysis  
System  

www.easypower.com

EasyPower, LLC

7730 SW Mohawk St.

Tualatin, OR 97062

(503)655-5059

techsupport@easypower.com

feedback@easypower.com

EasyPower Version 9.6

Copyright © 1991-2014 EasyPower, LLC. All Rights Reserved.

Help was last updated on 8/26/2014