You are here: Coordination > Insert Difference Calculator

Insert Difference Calculator

Figure 1: Using Difference Calculator

Using the Difference Calculator, you can calculate the difference in trip time between the TCC plot of any two protective devices at any given current value, as follows:

  1. Select any two TCC curves on the TCC plot. To select two curves, hold down SHIFT and select the two curves in the TCC window.
  2. Click Difference Calc (Insert Time Difference Calculator) in the TCC ribbon. When you insert a difference calculator, a red vertical line appears representing a current value as shown in the figure above. Next to it, the calculated time difference appears along with a time difference marker. The time difference marker is a line that looks like a square bracket (]).
  3. Drag the red line to calculate the time difference at various current values.

To calculate the minimum time difference between the two curves:

  1. Select the time difference marker and click the arrow below Difference Calc.
  2. Click Calculate Min Difference. The red line moves to the current value at which the minimum time difference occurs between the two curves.

Note: You can also right-click after selecting the time difference marker and click Calculate Min Difference from the menu.

More Information

Coordination with PowerProtectorâ„¢  
     

www.easypower.com

EasyPower, LLC

7730 SW Mohawk St.

Tualatin, OR 97062

(503)655-5059

techsupport@easypower.com

feedback@easypower.com

EasyPower Version 9.7

Copyright © 1991-2016 EasyPower, LLC. All Rights Reserved.

Help was last updated on 2/8/2016