You are here: Coordination > Open and Delete TCCs

Open and Delete TCCs

You can open stored TCC curves by clicking Open TCC in the Coordination or TCC ribbon. This opens the Open TCC dialog box shown below.

Figure 1: Open TCC dialog

Select the TCC that you would like to open and click Open. If you would like to view the original TCC Curve that was stored, select the Open Using Stored Curves (Read-Only) check box. Selecting this option only enables you to view the TCC Curve as it was saved. You will not be able to alter the TCC Curve. If you select Open Using Latest Settings, then the latest data that you have entered for the device is plotted. You can also drag and modify the TCC Curve if you select this setting.

More Information

Coordination with PowerProtectorâ„¢  
Save and Store  
     

www.easypower.com

EasyPower, LLC

7730 SW Mohawk St.

Tualatin, OR 97062

(503)655-5059

techsupport@easypower.com

feedback@easypower.com

EasyPower Version 9.7

Copyright © 1991-2016 EasyPower, LLC. All Rights Reserved.

Help was last updated on 2/8/2016