The meter enables EasyPower to connect to on-line metering systems. Historical data stored in a database is displayed directly on the EasyPower one-line and stored in SCADA fields for analysis purposes.
This dialog box includes the following areas and tabs:
See Common Tabs for information on the Location, Comments, Hyperlinks, Media Gallery, or Collected Data tabs.
Figure 1: Meter Data Dialog Box
Option | Description |
---|---|
ID Name |
Uniquely identifies the equipment item. The program automatically assigns a name, but you can change it, if needed. The name can be up to 16 characters long. For meters, the program automatically assigns the names MET-1, MET-2, MET-3, and so on. |
Bus Conn | The meter is connected to one end of an equipment item. This states the bus to which that equipment item is connected. |
Equip Conn | This states the bus to which that equipment item is connected. Unlike most equipment, the connectivity of meters cannot be changed from the Meter Data dialog box. |
Option | Description |
---|---|
Load Equipment | The meter can be assigned to a particular motor, load, MCC, or panel. Selecting Motor places all available motors in the ID Name list. Multiple meters can be assigned to one motor, but only data from the last one assigned is saved to that equipment item’s SCADA fields. |
Association |
When EasyPower is connected to a SCADA database and you open the SCADA focus, the data for the associated meter is displayed on the one-line. After a meter is associated, it is no longer be available in the Site and Meter lists. When meter information is available, choosing Save or Store Scenario stores the information into the SCADA fields of the equipment item assigned in Load Equipment ID Name. |
See Common Tabs for information on the Location, Comments, Hyperlinks, Media Gallery, or Collected Data tabs.
Database Technical Reference | Common Tabs |
Media Gallery |