Text Visibility Tab
EasyPower's customizable options are set up under Tools > Options.
The Text Visibility tab lets you select which item types will show ID name text and data text on the one-line. Select the appropriate boxes to view the text you want to see for each equipment item. Your choices are saved from one EasyPower session to the next. They apply to all one-lines, not just the current one.
Note: Settings on the Text Visibility tab take precedence over settings made on the One-line Text tab.
Figure 1: Text Visibility tab of Options Dialog Box
| Option | Description |
|---|---|
|
One-line Display |
If you select Equipment Data, EasyPower displays the data for each item that has a check box selected in the Show data for list. Selecting PU Impedances displays the per unit impedance for each item with a check box selected in the Show data for list. Using this feature, you can produce an impedance diagram of your power system. The positive sequence and zero sequence (in parenthesis) impedances are displayed. |
|
Line Data Text Location |
The sides where the data appear are categorized as “From” or “To” based on how you connect the endpoints when creating the line. The “From” side and “To” side of a line can be switched by opening the line dialog box and switching the names in the From Bus and To Bus fields. You can also select to have the line data text appear with the ID name. |
|
Show for SSTs |
The text representing circuit breaker rating displays one of the following:
|
|
Show Resistor Amps |
This enables the display of the amp rating of the grounding resistor. |
