Motor
Figure 1: Auto Coordination Options - Motor
Use to set tolerances when comparing trip curves.
Option | Description |
---|---|
FLA |
Trip curve will be set outside tolerance boundary when comparing with Motor FLA. The range is –50 % to 50 %. |
LRA |
Trip curve will be set outside tolerance boundary when comparing with Motor Locked Rotor Amps (LRA). The range is –50 % to 50 %. |
Asym |
Trip curve settings will be set outside tolerance boundary when comparing with Motor Asymmetrical inrush amps. The range is –50 % to 50 %. |
Damage I2T |
Sets the minimum gap between the protective device trip curve and the thermal I^2T damage curve of the motor. The range is –50 % to 50 %. Note: When coordinating protective devices at low voltage, EasyPower assumes the maximum downstream motor size to be 250 HP. |