Panel Variables
See also Panel Summary Tab Variables and Code Factor Variables.
General
These variables are available to all schedule templates.
|
%Current_Date_Time% |
Format: "MM/DD/YYYY HH:MM:SS" |
|
%EasyPower_Version% |
EasyPower version |
|
%FileName% |
File name |
|
%ProjectCode% |
Project Code in File Properties |
|
%ProjectName% |
Project Name in File Properties |
Abbreviations
These variables enable you to use abbreviations in your schedules. See Abbreviations in Schedule Load Types for more information.
| %ShortName% | Short Name |
| %TargetName% | Long Name |
Accessories
These variables display information from the table on the Accessories tab.
|
%AccessoryName% |
Accessory name |
|
%row% |
Row number |
|
%meterKVA% |
Accessories tab |
|
%meterLoadWithSafetyFactor% |
Accessories tab |
|
%meterMaxDemand% |
Accessories tab |
|
%meterNewDemandLoad% |
Accessories tab |
|
%meterNote% |
Accessories tab |
|
%meterPowerFactor% |
Accessories tab |
|
%meterReadingDate% |
Accessories tab |
|
%meterSafetyFactor% |
Accessories tab |
|
%meterTotalAmps% |
Accessories tab |
|
%meterTotalNewDemandLoad% |
Accessories tab |
Equipment
These variables display information from the various tabs in the equipment data dialog boxes.
|
%afh_boundary% |
Estimated Arc Flash Boundary (inches), Summary tab, from the last fault and store |
|
%afh_incident_energy% |
Incident Energy (cal/cm2), Summary tab, from the last fault and store |
|
%afh_ppe% |
Arc Flash PPE, Summary tab, from the last fault and store |
|
%afh_working_distance% |
Arc Flash Working Distance (inches), from the last fault and store |
|
%Aic% |
SC Rating (kA), Specifications tab (Bus Rating section) |
|
%Amps% |
Panel - main bus rating (A); MCC - horizontal bus rating (A) |
|
%Area% |
Area |
|
%AverageCodeAmps% |
Average Connected Amps Based on Total Demand Load |
|
%AverageConnectedAmps% |
Average Connected Amps Based on Total Connected Load |
|
%BusRating% |
Bus rating (A) |
|
%Code_Factor_I% |
Panel Summary tab |
|
%Code_Factor_VA% |
Panel Summary tab |
|
%CodeAmps% |
Panel Summary tab |
|
%CodeVA% |
Panel Summary tab |
|
%Comment% |
Comments tab |
|
%ConnAmps% |
Panel Summary tab |
|
%Connected_A_I% |
Panel Summary tab (changed in 10.4 to always report "A" phase, not first phase) |
|
%Connected_A_PF% |
Panel Summary tab (changed in 10.4 to always report "A" phase, not first phase) |
|
%Connected_A_VA% |
Panel Summary tab (changed in 10.4 to always report "A" phase, not first phase) |
|
%Connected_A_Vars% |
Panel Summary tab (changed in 10.4 to always report "A" phase, not first phase) |
|
%Connected_A_Watts% |
Panel Summary tab (changed in 10.4 to always report "A" phase, not first phase) |
|
%Connected_B_I% |
Panel Summary tab (changed in 10.4 to always report "B" phase, not second phase) |
|
%Connected_B_PF% |
Panel Summary tab (changed in 10.4 to always report "B" phase, not second phase) |
|
%Connected_B_VA% |
Panel Summary tab (changed in 10.4 to always report "B" phase, not second phase) |
|
%Connected_B_Vars% |
Panel Summary tab (changed in 10.4 to always report "B" phase, not second phase) |
|
%Connected_B_Watts% |
Panel Summary tab (changed in 10.4 to always report "B" phase, not second phase) |
|
%Connected_C_I% |
Panel Summary tab (changed in 10.4 to always report "B" phase, not second phase) |
|
%Connected_C_PF% |
Panel Summary tab (changed in 10.4 to always report "B" phase, not second phase) |
|
%Connected_C_VA% |
Panel Summary tab (changed in 10.4 to always report "B" phase, not second phase) |
|
%Connected_C_Vars% |
Panel Summary tab (changed in 10.4 to always report "B" phase, not second phase) |
|
%Connected_C_Watts% |
Panel Summary tab (changed in 10.4 to always report "B" phase, not second phase) |
|
%Connected_1_I% |
Reports the first phase (may be A, B, or C) |
|
%Connected_1_PF% |
Reports the first phase (may be A, B, or C) |
|
%Connected_1_VA% |
Reports the first phase (may be A, B, or C) |
|
%Connected_1_Vars% |
Reports the first phase (may be A, B, or C) |
|
%Connected_1_Watts% |
Reports the first phase (may be A, B, or C) |
|
%Connected_2_I% |
Reports the second phase (may be A, B, C or blank) |
|
%Connected_2_PF% |
Reports the second phase (may be A, B, C or blank) |
|
%Connected_2_VA% |
Reports the second phase (may be A, B, C or blank) |
|
%Connected_2_Vars% |
Reports the second phase (may be A, B, C or blank) |
|
%Connected_2_Watts% |
Reports the second phase (may be A, B, C or blank) |
|
%Connected_3_I% |
Reports the third phase (may be C or blank) |
|
%Connected_3_PF% |
Reports the third phase (may be C or blank) |
|
%Connected_3_VA% |
Reports the third phase (may be C or blank) |
|
%Connected_3_Vars% |
Reports the third phase (may be C or blank) |
|
%Connected_3_Watts% |
Reports the third phase (may be C or blank) |
|
%Connected_Subfed_Total_Amps% |
Subfed Total Amps |
|
%Connected_Subfed_Total_VA% |
Subfed Total VA |
|
%Connected_Total_I% |
Panel Summary tab |
|
%Connected_Total_PF% |
Panel Summary tab |
|
%Connected_Total_VA% |
Panel Summary tab |
|
%Connected_Total_Vars% |
Panel Summary tab |
|
%Connected_Total_Watts% |
Panel Summary tab |
|
%ConnectedPhaseA_KVA% |
|
|
%ConnectedPhaseB_KVA% |
|
|
%ConnectedPhaseC_KVA% |
|
|
%ConnectedTotal_KVA% |
|
|
%ConnVA% |
Panel Summary tab |
|
%Demand_A_I% |
Panel Summary tab (changed in 10.4 to always report "A" phase, not first phase) |
|
%Demand_A_PF% |
Panel Summary tab (changed in 10.4 to always report "A" phase, not first phase) |
|
%Demand_A_VA% |
Panel Summary tab (changed in 10.4 to always report "A" phase, not first phase) |
|
%Demand_A_Vars% |
Panel Summary tab (changed in 10.4 to always report "A" phase, not first phase) |
|
%Demand_A_Watts% |
Panel Summary tab (changed in 10.4 to always report "A" phase, not first phase) |
|
%Demand_B_I% |
Panel Summary tab (changed in 10.4 to always report "B" phase, not second phase) |
|
%Demand_B_PF% |
Panel Summary tab (changed in 10.4 to always report "B" phase, not second phase) |
|
%Demand_B_PF% |
Panel Summary tab (changed in 10.4 to always report "B" phase, not second phase) |
|
%Demand_B_Vars% |
Panel Summary tab (changed in 10.4 to always report "B" phase, not second phase) |
|
%Demand_B_Watts% |
Panel Summary tab (changed in 10.4 to always report "B" phase, not second phase) |
|
%Demand_C_I% |
Panel Summary tab (changed in 10.4 to always report "C" phase, not third phase) |
|
%Demand_C_PF% |
Panel Summary tab (changed in 10.4 to always report "C" phase, not third phase) |
|
%Demand_C_VA% |
Panel Summary tab (changed in 10.4 to always report "C" phase, not third phase) |
|
%Demand_C_Vars% |
Panel Summary tab (changed in 10.4 to always report "C" phase, not third phase) |
|
%Demand_C_Watts% |
Panel Summary tab (changed in 10.4 to always report "C" phase, not third phase) |
|
%Demand_1_I% |
Reports the first phase (may be A, B, or C) |
|
%Demand_1_PF% |
Reports the first phase (may be A, B, or C) |
|
%Demand_1_VA% |
Reports the first phase (may be A, B, or C) |
|
%Demand_1_Vars% |
Reports the first phase (may be A, B, or C) |
|
%Demand_1_Watts% |
Reports the first phase (may be A, B, or C) |
|
%Demand_2_I% |
Reports the second phase (may be A, B, C or blank) |
|
%Demand_2_PF% |
Reports the second phase (may be A, B, C or blank) |
|
%Demand_2_VA% |
Reports the second phase (may be A, B, C or blank) |
|
%Demand_2_Vars% |
Reports the second phase (may be A, B, C or blank) |
|
%Demand_2_Watts% |
Reports the second phase (may be A, B, C or blank) |
|
%Demand_3_I% |
Reports the third phase (may be C or blank) |
|
%Demand_3_PF% |
Reports the third phase (may be C or blank) |
|
%Demand_3_VA% |
Reports the third phase (may be C or blank) |
|
%Demand_3_Vars% |
Reports the third phase (may be C or blank) |
|
%Demand_3_Watts% |
Reports the third phase (may be C or blank) |
|
%Demand_Total_I% |
Panel Summary tab |
|
%Demand_Total_PF% |
Panel Summary tab |
|
%Demand_Total_VA% |
Panel Summary tab |
|
%Demand_Total_Vars% |
Panel Summary tab |
|
%Demand_Total_Watts% |
Panel Summary tab |
|
%DemandAmps% |
Panel Summary tab |
|
%DemandVA% |
Panel Summary tab |
|
%Design_I% |
Panel Summary tab |
|
%Design_VA% |
Panel Summary tab |
|
%DesignAmps% |
Panel Summary tab |
|
%DesignCapacity% |
|
|
%DesignRating% |
|
|
%DesignVA% |
Panel Summary tab |
|
%Enclosure% |
Enclosure, Specifications tab |
|
%Fed_By% |
Fed By, Specifications tab |
|
%Header_Comment% |
Header Comment, Specifications tab |
|
%IncomingFeederConductorRating% |
Incoming tab |
|
%IncomingFeederTripAmps% |
Incoming tab |
|
%IncomingFeederTripDevice% |
Incoming tab |
|
%IncomingFrameLTPU% |
Incoming tab |
|
%IncomingFramePlug% |
Incoming tab |
|
%IncomingMfr% |
Incoming tab |
|
%IncomingPlugLTPU% |
Incoming tab |
|
%IncomingRating% |
Incoming tab |
|
%IncomingStyle% |
Incoming tab |
|
%Location% |
Location, Specifications tab |
|
%Main% |
Main Incoming Device Type, Incoming tab |
|
%MainDeviceTripAmps% |
Main Incoming Device Trip Amps (A) - based on LTPU |
|
%MainRating% |
Main Incoming Device Frame Amps |
|
%Manufacturer% |
Manufacturer, Specifications tab (Bus Rating section) |
|
%Material% |
Specifications tab |
|
%Mounting% |
Mounting, Specifications tab |
|
%Name% |
Equipment ID Name |
|
%Panel_Description% |
Panel Description |
|
%Panel_Rating_kA% |
Lowest Rated Equipment kA (in Description tab) |
|
%PhaseLabel1% |
A, B, or C, depending on phase type |
|
%PhaseLabel2% |
A, B, or C, depending on phase type |
|
%PhaseLabel3% |
A, B, or C, depending on phase type |
|
%RatingType% |
|
|
%sc_sym_a% |
Short Circuit Symmetrical A |
|
%sc_sym_ka% |
Short Circuit Symmetrical kA |
|
%SCCR% |
Bracing (kA), Specifications tab |
|
%Service% |
Service, MCC/Panel Specifications tab |
|
%SwgUnits% |
Specified Units (kVA or Amps) |
|
%SwitchType% |
Bus Type (Type in Specifications tab) |
|
%TotalCodeAmps% |
Total Downstream Code Factor Load (Amps) |
|
%TotalCodeVA% |
Total Downstream Code Factor Load (VA) |
|
%TotalConnAmps% |
Total Downstream Connected Load (Amps) |
|
%TotalConnAverageAmps% |
|
|
%TotalConnVA% |
Total Downstream Connected Load (VA) |
|
%TotalDemandAmps% |
Total Downstream Demand Load (Amps) |
|
%TotalDemandVA% |
Total Downstream Demand Load (VA) |
|
%TotalDesignAmps% |
Total Downstream Design Load (Amps) |
|
%TotalDesignVA% |
Total Downstream Design Load (VA) |
|
%Type% |
Type, Specifications Tab (Bus Rating section) |
|
%Unit% |
U.S. or Metric |
|
%Units% |
kVA or Amps |
|
%VAUnits% |
Panel Load Units (VA or Amps), Description Tab |
|
%Voltage% |
Base Voltage (V) |
|
%VoltageLL% |
Line-to-line bus voltage |
|
%Zone% |
Line-to-line bus voltage |
Grid
These variables display information that appears in the data grids in the schedule.
|
%BreakerAmps% |
|
|
%BreakerCurrentRating% |
Protective Device Trip (A), Description tab |
|
%BreakerManufacturer% |
Protective Device Manufacturer, Description tab |
|
%BreakerStyle% |
Protective Device Style, Description tab |
|
%BreakerType% |
Protective Device Type, Description tab |
|
%CB_Fuse_Poles% |
CB/Fuse Poles, Description tab |
|
%CircuitkV% |
|
|
%CodeFactor% |
Code Factors, Description tab |
|
%ConductorInsulation% |
Conductor Insulation, Description tab |
|
%ConductorNumberPerPhase% |
Conductor Number Per Phase, Description tab |
|
%ConductorSize% |
Conductor Size, Description tab |
|
%ConductorType% |
Conductor Type, Description tab |
|
%Description% |
Load Description, Description tab (for MCC or panel) |
|
%Library_Load% |
Library Load, Description tab |
|
%Load_Description% |
|
|
%Load_Location% |
Load Location, Description tab |
|
%Load_Type% |
|
|
%LoadCategory% |
|
|
%LoadFacility% |
|
|
%LoadFloor% |
|
|
%LoadRef1% |
|
|
%LoadRef1And2% |
|
|
%LoadRef2% |
|
|
%LocationName% |
|
|
%LtPickupAmps% |
|
|
%LtPickupSetting% |
|
|
%Notes% |
|
|
%Panel_Row_Comment% |
|
|
%Phase% |
|
|
%PhaseATotal% |
Always reports the A phase. Beginning with EasyPower 10.4, this variable is replaced with %Phase1Total% to support single-phase panel schedules. |
|
%PhaseBTotal% |
Always reports the B phase. Beginning with EasyPower 10.4, this variable is replaced with %Phase2Total% to support single-phase panel schedules. |
|
%PhaseCTotal% |
Always reports the C phase. Beginning with EasyPower 10.4, this variable is replaced with %Phase3Total% to support single-phase panel schedules. |
|
%Phase1Total% |
Reports the first phase (may be A, B, or C) |
|
%Phase2Total% |
Reports the second phase (may be A, B, C or blank) |
|
%Phase3Total% |
Reports the third phase (may be C or blank) |
|
%SectionSpace% |
Section Space, Description tab |
|
%Poles% |
Poles |
|
%RefNumber% |
|
|
%row% |
Row Number, Description tab |
|
%Tool% |
|
|
%VA% |
|
