TCC Status Bar
Figure 1: TCC Status Bar
The TCC status bar appears at the bottom of the window and indicates the following settings:
Option |
Description |
---|---|
Displays SNAP if grid snapping is on. See The Snap Grid for more information. |
|
Fault Type |
Displays the selected fault type. |
Calc Method |
Calculation method (ANSI or IEC) selected in Tools > Options > System. |
Voltage |
Either kV or per-unit. |
Driving Point kV |
The driving point voltage value as set in Short Circuit Options on the Control tab. |
Displays the coordinates of the pointer arrow on the time-current curve by current (amperes) @ time (seconds). |