Data Text for Breakers, Switches, and Fuses
All closed breakers, switches, and fuses must have a location defined for DataText1. This is so that equipment duty results in short circuit are displayed correctly.
Note that there are several orientations that need to be modified for correct data text placement.
Equipment |
One-line Graphics |
Vertical |
Vertical Flipped |
Horizontal |
Horizontal Flipped |
---|---|---|---|---|---|
HV Breaker |
X |
X |
X |
X |
|
LV Breaker | Breaker Only |
X |
X |
X |
X |
LV Breaker | Fused Breaker |
X |
X |
X |
X |
LV Breaker |
Breaker Contactor |
X |
X |
|
|
Switch |
|
X |
X |
X |
X |
Fused Switch |
Fuse Only |
X |
X |
X |
X |
Fused Switch |
Fused Switch |
X |
X |
X |
X |
Fused Switch |
Fused Contactor |
X |
X |
|
|
An example for a low voltage breaker is shown below for reference. The relevant line is emphasized.
<Equipment Type="LowVoltageBreaker">
<GraphicDefinition SubType="AC" CurrentType="AC" DefaultSpacing="2" BreakerState="Closed" Orientation="Vertical" AcadBlockName="LVBKR_AB">
<SnapPoint X="0" Y="4" />
<ConnectionPoint X="0" Y="-8" Connection="From" />
<ConnectionPoint X="0" Y="16" Connection="To" />
<TextTemplate>
<Text Block="IdName" HorizontalAlignment="Left" Justification="Left" VerticalAlignment="Top" X="12" Y="0" />
<Text Block="DataText1" HorizontalAlignment="Right" Justification="Left" VerticalAlignment="Top" X="-8" Y="-2" />
</TextTemplate>
<SymbolTemplate>
<Polyline Points="0 16, 0 12, -5 0, " />
<Line X1="-2" Y1="-2" X2="2" Y2="2" />
<Line X1="2" Y1="-2" X2="-2" Y2="2" />
<Line X1="0" Y1="0" X2="0" Y2="-8" />
</SymbolTemplate>
</GraphicDefinition>