Switch - Connection Information
Figure 1: Connection Information
| Option | Description |
|---|---|
|
Uniquely identifies the equipment item. The program automatically assigns a name, but you can change it, if needed. The name can be up to 30 characters long. For switches, the program automatically assigns the names SW-1, SW-2, SW-3, and so on. |
|
|
On Bus |
This is the ID name of the bus to which the equipment is connected. The base kV of the bus is indicated on the right. |
|
Connection Type |
Whether the switch is connected as a Feeder (such as to a cable, busway, or transformer) or as a Tie (between two buses). |
|
Open/Closed |
Normal state of the switch. If Open, the one-line displays "OPEN" next to the switch symbol. If Closed, the one-line symbol does not show the "OPEN" tag. |
|
Phase |
The phase type for this item:
|
|
Group Name/Type |
If the switch is part of a functional group, the group name and type appears here. See Functional Groups. |
