Harmonics Text Output

Select Harmonics Options, and click the Text Output tab to select output report types. You can also click  Harmonics Reports on the Harmonics tab.

To set harmonics options, from the Harmonics focus, click Harmonics Options. You can also access the options from within the Database Edit focus by selecting Tools > Options > Analysis Options > Harmonics.

Figure 1: Text Output Tab of the Harmonics Options Dialog Box

Option Descriptions
Option Description

Current Flow Report

Select Current Flow Report to generate a text report whenever a Single Point Current Flow or All Source Current Flow is performed. This report contains bus voltages and angles, as well as equipment currents and angles.

Summation Detail

The Summation Detailed Report contains a list of each bus and its attached equipment items along with the output analysis related to each item.

Summation Spectra

When Summation is selected, the Summation Spectra Report contains a list of buses with per-unit voltages and branch items with per-unit currents. All harmonics present are listed, while insignificant amounts are represented with a zero value.

To obtain a report of all harmonic sources, select the arrow below Find in the Harmonics tab and select Query. Select Items (Motor, Load, Motor Control Center, Panel Schedule), select Output > Item Selection, then in the Advanced tab for Load Class, select Any and for Load Type, select Harmonic.

Summation Summary

Select one or more of these reports, or select All Reports to have EasyPower create the complete report list.

For IEEE-519, you can select either the 2022 or 2014 version.

Bus Voltage

The output can be displayed in either V(LL), kV(LL) or Per-unit.

Current Unit

Current can be displayed in Amps, Per-unit (system base), or Per-unit (equipment rating base).

Next: Harmonics One-line Output

More Information