You can map the circuits including low voltage breakers, cables, and loads, and specify whether to use default values, Revit values, input your own values, or use a Lua script. The program uses this configuration when it determines that the Revit element is part of a bus.
The circuit mappings work the same way as described in Family Mappings . In this case, you are describing how you want to map the circuit details for the low voltage breakers, cables, and loads in the circuit.
Note: You can map circuits as cable or busway. Cable is the default. If you define a busway mapping configuration, the program uses the busway instead of the cable. This is different from other mapping configurations where the tab on the farthest left is used first.
Figure 1: Circuit Mappings Tab
