Shunt - Connection Information

The Connection Information area of the Shunt Data dialog box is shown.

Figure 1: Connection Information

Option Descriptions
Option Description

ID Name

Uniquely identifies the equipment item. The program automatically assigns a name, but you can change it, if needed. The name can be up to 30 characters long. Special characters such as &!%^\,? cannot be used in the name.

For shunts, the program automatically assigns the names SH-1, SH-2, SH-3, and so on.

To Bus

This is the ID name of the bus to which the equipment is connected. The base kV of the bus is indicated on the right.

The base kV displays the highest voltage between the current carrying conductors. For 3-phase or line-to-line connected single-phase equipment, the base kV is the line-to-line (LL) voltage. For line-to-neutral (LN) connected single-phase equipment, the base kV is the line-to-neutral voltage.

Phase

The phase type for this item:

  • 3PH: 3 phase
  • 1PH: 1 phase

The information icon is a blue circle with a lowercase "i" in the center.

(Information Icon)

The blue information icon indicates that the item must be disconnected to change the value. See Information Icon for more information.

More Information