Arc Flash Scenario Comparison Report

The fault levels and incident energies at any bus can change with the connection configuration within a system. For example, you may have:

In these different scenarios, you get different fault levels at any bus in the system. If you have several scenarios stored in a one-line file, you can compare the results for arc flash hazard for each scenario and create a report that shows the worst-case incident energies for bus faults.

The Arc Flash Scenario Comparison report displays the arc flash results of each scenario. You can view all scenarios or filter the report to show only the worst-case scenarios.

Figure 1: Arc Flash Scenario Comparison Report

See Working with the Arc Flash Scenario Comparison Report for more information.

Note: For more information on arc flash hazard analysis, see Arc Flash Hazard Analysis.

More Information

Scenario Manager Equipment Groups
Scenario Comparison Report Settings Scenario Groups
Creating the Scenario Comparison Report Printing Arc Flash Labels
Scenario Comparison Report Options Error Reports for the Scenario Comparison Report
Working with the Arc Flash Scenario Comparison Report  
     

www.easypower.com

EasyPower, LLC

7730 SW Mohawk St.

Tualatin, OR 97062

(503)655-5059

techsupport@easypower.com

feedback@easypower.com

EasyPower knowledge base

EasyPower Version 9.8

Copyright © 2017 EasyPower, LLC. All Rights Reserved.

Help was last updated on 7/10/2017