Creating a Scenario

The following is an example that describes creating a scenario:

  1. In the EasyPower\Samples directory, open simple.dez. Save the file. This establishes the base case for this file. The Windows title bar displays (Base case).
  2. Click Scenario Mgr > New Scenario.This puts the one-line in scenario mode. The Windows title bar displays (Scenario-1), which is the default name EasyPower assigns for a scenario. Any changes made while in Scenario-1 are only saved to this scenario and are not seen in the saved base case.
  3. Add a motor to BUS-2.
  4. Click Scenario Manager > Store Scenario. Scenario-1 becomes a macro which instructs EasyPower to add a motor to BUS-2.
  5. Click Scenario Manager > Open Base Case. This returns you to the last saved base case file (the one saved in step 1 above). The motor disappears.
  6. Click Scenario Manager > Open Scenario. Select Scenario-1 and click OK. This runs the macro that was stored in step 4. The motor reappears.

More Information

Scenario Manager  
Scenario Manager Functionality  
     

www.easypower.com

EasyPower, LLC

7730 SW Mohawk St.

Tualatin, OR 97062

(503)655-5059

techsupport@easypower.com

feedback@easypower.com

EasyPower knowledge base

EasyPower Version 9.8

Copyright © 2017 EasyPower, LLC. All Rights Reserved.

Help was last updated on 7/10/2017