Meter Data

The meter enables EasyPower to connect to on-line metering systems. Historical data stored in a database is displayed directly on the EasyPower one-line and stored in SCADA fields for analysis purposes.

This dialog box includes the following areas and tabs:

See Common Tabs for information on the Location, Reliability, Comments, Hyperlinks, Media Gallery, or Collected Data tabs.

Figure 1: Meter Data Dialog Box

Connection Information

Option Description
ID Name

Uniquely identifies the equipment item. The program automatically assigns a name, but you can change it, if needed. The name can be up to 16 characters long.

For meters, the program automatically assigns the names MET-1, MET-2, MET-3, and so on.

Bus Conn The meter is connected to one end of an equipment item. This states the bus to which that equipment item is connected.
Equip Conn This states the bus to which that equipment item is connected. Unlike most equipment, the connectivity of meters cannot be changed from the Meter Data dialog box.

Phase

The phase of the item. Currently, this is for reference only.

Specifications Tab

Option Description

Load Equipment

The meter can be assigned to a particular motor, load, MCC, or panel. Selecting Motor places all available motors in the ID Name list. Multiple meters can be assigned to one motor, but only data from the last one assigned is saved to that equipment item’s SCADA fields.

Association

These options are not currently supported.

Other Tabs

See Common Tabs for information on the Location, Reliability, Comments, Hyperlinks, Media Gallery, or Collected Data tabs.

More Information

Database Technical Reference Common Tabs
Media Gallery