Figure 1: Temporary Three-Winding Transformer Data Dialog Box
Tap kV: Tap kV of a winding. Unless you change them from this dialog box, these values default to the tap kV values set from the Database Edit focus.
These choices are only available if the transformer is defined to have LTC information from the Database Edit focus.
Auto: Sets LTC to automatically control voltage or var flow.
Blocked: Sets LTC to be blocked. The solution will be determined directly from transformer taps.
Step Size: LTC step size default is the percentage in the database dialog box, but you can type in your own percentage step size.
Temporary Dialog Boxes | |
Power Flow Analysis |