Short Circuit Reference (ANSI)

Overview

The EasyPower short circuit analysis is designed for the analysis of three-phase and unbalanced faults in industrial, commercial, and utility power systems. You can calculate ANSI or IEC Standard fault currents for comparison with circuit breaker and fuse interrupting duties. You can also calculate currents for protective device coordination, analyze trouble spots using the symmetrical component output, and calculate remote bus fault voltages for the setting of voltage controlled relays.

This section describes how to use EasyPower's short circuit analysis features. It is intended to provide a procedural overview to help you quickly become productive. It is not intended to provide a tutorial on short circuit study procedures. You must be in the Short Circuit focus to do the operations described here.

This section describes procedures for ANSI Short Circuit. The IEC-60909 Short Circuit features are slightly different and are described in Short Circuit Reference (IEC).

More Information

Setting the Short Circuit Method Arc Flash Hazards Analysis
SmartDuty™ Calculation and Theory
Voltage Sensitivity Studies DC Short Circuit
Line End Fault Short Circuit Reference (IEC)
Short Circuit Options (ANSI) Storing Short Circuit and Arc Flash Results
     

www.easypower.com

EasyPower, LLC

7730 SW Mohawk St.

Tualatin, OR 97062

(503)655-5059

techsupport@easypower.com

feedback@easypower.com

EasyPower knowledge base

EasyPower Version 10.0

Copyright © 2018 EasyPower, LLC. All Rights Reserved.

Help was last updated on 5/22/2018