Busway - Connection Information

Option Descriptions
Option	Description
ID Name	Uniquely identifies the equipment item. The program automatically assigns a name, but you can change it, if needed. The name can be up to 30 characters long. For busways, the program automatically assigns the names BWY-1, BWY-2, BWY-3, and so on.
From Bus	The bus from which the equipment connects, which must already exist on the one-line. For your reference, the From Bus base kV is displayed next to the bus name. You must be careful that the From Bus has the same base kV as the To Bus.
To Bus	The bus to which the equipment connects, which must already exist on the one-line. For your reference, the To Bus base kV is displayed next to the bus name. You must be careful that the To Bus has the same base kV as the From Bus.
Phase	The phase type for this item: 3PH: 3 phase 1PH: 1 phase
Show Entire Line	This box is selected by default and causes the entire line to be displayed. By clearing the check box, the line is only shown as a short section at each end with labels indicating the bus to which the other end is attached.
Style	The style of the line that appears on the one-line. This setting is specific to the selected item and overrides any default styles specified for the equipment.
Weight	The weight of the line that appears on the one-line. This setting is specific to the selected item and overrides any default weights specified for the equipment.
(Information Icon)	The blue information icon indicates that the item must be disconnected to change the value. See Information Icon for more information.

ID Name

Uniquely identifies the equipment item. The program automatically assigns a name, but you can change it, if needed. The name can be up to 30 characters long.

For busways, the program automatically assigns the names BWY-1, BWY-2, BWY-3, and so on.

From Bus

The bus from which the equipment connects, which must already exist on the one-line. For your reference, the From Bus base kV is displayed next to the bus name. You must be careful that the From Bus has the same base kV as the To Bus.

To Bus

The bus to which the equipment connects, which must already exist on the one-line. For your reference, the To Bus base kV is displayed next to the bus name. You must be careful that the To Bus has the same base kV as the From Bus.

Phase

The phase type for this item:

3PH: 3 phase
1PH: 1 phase

Show Entire Line

This box is selected by default and causes the entire line to be displayed. By clearing the check box, the line is only shown as a short section at each end with labels indicating the bus to which the other end is attached.

Style

The style of the line that appears on the one-line. This setting is specific to the selected item and overrides any default styles specified for the equipment.

Weight

The weight of the line that appears on the one-line. This setting is specific to the selected item and overrides any default weights specified for the equipment.

(Information Icon)

The blue information icon indicates that the item must be disconnected to change the value. See Information Icon for more information.

Busway - Connection Information

More Information