Fused Switch - Connection Information

Option Descriptions
Option	Description
ID Name	Uniquely identifies the equipment item. The program automatically assigns a name, but you can change it, if needed. The name can be up to 30 characters long. For fused switches, the program automatically assigns the names FS-1, FS-2, FS-3, and so on.
Open	Normal state of the fused switch. If selected, the one-line displays “OPEN” next to the fused switch symbol.
Closed	If selected, the one-line does not display “OPEN” next to the fused switch symbol.
On Bus	The bus connected to the fuse switch, which must already exist on the one-line.
Base kV	The kV of the bus to which the fuse switch is connected. The options available in the Specifications tab and Short Circuit tab depend on the bus voltage. Either LV or HV fused switches can be selected from this dialog box. Although the EasyPower Device Library has HV and LV Fused Switches as separate devices, the same dialog box is used to select both types.
Connection Type	Whether the fused switch is connected as a “Feeder,” (to a cable, busway, or transformer, for example.) or as a “Tie” (between two buses).
Phase	The phase type for this item: 3PH: 3 phase 1PH: 1 phase
Group Name/Type	If the fused switch is part of a functional group, the group name and type appears here. See Functional Groups.
Lock Auto-Sizing	When this check box is selected, this item cannot be automatically sized using SmartDesign™ (the auto-design feature).
Lock Auto-Coordination	When this check box selected, this item cannot be automatically sized using SmartPDC™ (the auto-coordination feature).

ID Name

Uniquely identifies the equipment item. The program automatically assigns a name, but you can change it, if needed. The name can be up to 30 characters long.

For fused switches, the program automatically assigns the names FS-1, FS-2, FS-3, and so on.

Open

Normal state of the fused switch. If selected, the one-line displays “OPEN” next to the fused switch symbol.

Closed

If selected, the one-line does not display “OPEN” next to the fused switch symbol.

On Bus

The bus connected to the fuse switch, which must already exist on the one-line.

Base kV

The kV of the bus to which the fuse switch is connected. The options available in the Specifications tab and Short Circuit tab depend on the bus voltage. Either LV or HV fused switches can be selected from this dialog box. Although the EasyPower Device Library has HV and LV Fused Switches as separate devices, the same dialog box is used to select both types.

Connection Type

Whether the fused switch is connected as a “Feeder,” (to a cable, busway, or transformer, for example.) or as a “Tie” (between two buses).

Phase

The phase type for this item:

3PH: 3 phase
1PH: 1 phase

Group Name/Type

If the fused switch is part of a functional group, the group name and type appears here. See Functional Groups.

Lock Auto-Sizing

When this check box is selected, this item cannot be automatically sized using SmartDesign™ (the auto-design feature).

Lock Auto-Coordination

When this check box selected, this item cannot be automatically sized using SmartPDC™ (the auto-coordination feature).

Fused Switch - Connection Information

More Information