Figure 1: Connection Information
| Option | Description |
|---|---|
|
Uniquely identifies the equipment item. The program automatically assigns a name, but you can change it, if needed. The name can be up to 30 characters long. Special characters such as &!%^\,? cannot be used in the name. For high voltage breakers, the program automatically assigns the names BH-1, BH-2, BH-3, and so on. |
|
|
Open/Closed |
Normal state of the high voltage breaker. If Open is selected, the one-line displays “OPEN” next to the high voltage breaker symbol. If Closed is selected, the one-line symbol does not display any text. |
|
On Bus |
The bus to which the high voltage breaker connects, which must already exist on the one-line. For your reference, the On Bus base kV is displayed next to the bus name. |
|
Phase |
The phase type for this item:
|
|
Connection Type |
Whether the high voltage breaker is connected as a “Feeder,” (such as to a cable, busway, transformer) or as a “Tie” (between two buses). |
