Motor - Connection Information

Figure 1: Connection Information

Option Description

ID Name

Uniquely identifies the equipment item. The program automatically assigns a name, but you can change it, if needed. The name can be up to 30 characters long. Special characters such as &!%^\,? cannot be used in the name.

For motors, the program automatically assigns the names M-1, M-2, M-3, and so on.

To Bus

This is the ID name of the bus to which the equipment is connected. The base kV of the bus is indicated on the right.

Ensure that the To Bus has approximately the same base kV as the motor.

The base kV displays the highest voltage between the current carrying conductors. For 3-phase or line-to-line connected single-phase equipment, the base kV is the line-to-line (LL) voltage. For line-to-neutral (LN) connected single-phase equipment, the base kV is the line-to-neutral voltage.

Phase

The phase type for this item:

  • 3PH: 3 phase
  • 1PH: 1 phase

Conn

The type of connection, which could be D (delta), Y (wye), or YG (wye-grounded). The default is D.

Model
  • Individual: Labels the motor as an individual motor.
  • Group: Labels the motor as a group of motors.

(Information Icon)

The blue information icon indicates that the item must be disconnected to change the value. See Information Icon for more information.

More Information