Harmonics One-line Output
Select 
Harmonics Options, and click the One-line Output tab to specify parameters that control how results are displayed on the one-line.
Figure 1: One-line Output Tab of the Harmonics Options Dialog Box
|
Option |
Description |
|---|---|
|
Show Units |
Enabling this displays the units of the one-line results. |
|
Show THD Per-unit in Percent |
When this is enabled, the THD values are displayed in percent. Otherwise they are displayed in per-unit. |
|
Global Decimal Precision |
This sets the number of digits past the decimal point for values displayed on the one-line. This is applicable for all values except voltages. |
|
Bus Voltage Precision |
This sets the number of digits past the decimal point for bus voltages displayed on the one-line. |
|
Branch Side |
Display branch flows which are "From" the bus, "To" the bus, or both "From" and "To" the bus. |
|
Bus Voltage |
The output can be displayed in either V(LL), kV(LL) or Per-unit. |
|
Current Unit |
Current can be displayed in Amps, Per-unit (system base), or Per-unit (equipment rating base). |
|
Losses Unit |
Select either kW and kVAR or MW and MVAR. |
