Harmonics Text Output
Select Harmonics Options, and click the Text Output tab to select output report types. You can also click Harmonics Reports on the Harmonics tab.
Figure 1: Text Output Tab of the Harmonics Options Dialog Box
Option | Description |
---|---|
Current Flow Report |
Select Current Flow Report to generate a text report whenever a Single Point Current Flow or All Source Current Flow is performed. This report contains bus voltages and angles, as well as equipment currents and angles. |
Summation Detail |
The Summation Detailed Report contains a list of each bus and its attached equipment items along with the output analysis related to each item. |
Summation Spectra |
When Summation is selected, the Summation Spectra Report contains a list of buses with per-unit voltages and branch items with per-unit currents. All harmonics present are listed, while insignificant amounts are represented with a zero value. To obtain a report of all harmonic sources, select the arrow below Find in the Harmonics tab and select Query. Select Items (Motor, Load, Motor Control Center, Panel Schedule), select Output > Item Selection, then in the Advanced tab for Load Class, select Any and for Load Type, select Harmonic. |
Summation Summary |
Select one or more of these reports, or select All Reports to have EasyPower create the complete report list. |
Bus Voltage |
The output can be displayed in either V(LL), kV(LL) or Per-unit. |
Current Unit |
Current can be displayed in Amps, Per-unit (system base), or Per-unit (equipment rating base). |